SMS commands

The GT06N vehicle tracker is considered one of the best devices in terms of ease of installation and handling, location accuracy, and speed of GPS signal acquisition. I have been using it for a very long time and it has proven to be very effective and reliable. The only drawback was that the battery would sometimes swell due to overheating. The solution to the problem was to remove the device's battery completely. Download itrack The itrack program is considered the most famous program used for activation, and there are better alternatives available (contact us) Download itrack for Android Download itrack for iPhone Recover itrack password The only way to recover the password is by contacting the person who opened the account on itrack, and in the event that you are unable to contact the person or lose his contact information, you can activate GT06N, but on another program that offers all the features of itrack. Related topics: How to send codes to the GT06N device Codes are sent by sending a text message to the SIM card inside the device (make sure you have enough balance to receive confirmation from the GT06N device), see examples: Server address identification code SERVER,1,server_address,port,0# Access point identification code APN: APN,apn_name# Current server address and APN inquiry code GPRSSET# GT06N Query SMS Commands Note: The hashtag (#) is at the end of the code Function Code Reply from the GT06N device Inquiry about the GT06N device version VERSION# eg[VERSION]GT06B_10_8MM_B25_V11_LA [BUILD]2013/01/04 17:45 Inquiry about the main parameters PARAM# egGPS report on time interval：IMEI:868120103643505;TIMER:20,20;SENDS:5;SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1;Defense time:10;TimeZone:E,8,0;GPS report on distance interval：IMEI:868120103643505;Distance:200;SENDS:5;SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1;Defense time:10;TimeZone:E,8,0;Inquire server address and connections GPRSSET# egGPRS:ON; APN:CMNET,,;Server:1,hgt06.szdatasource.com,8841,0;URL:https://maps.google.com/maps?q=; Device status query STATUS# egBattery:3.41V,Battery too low! Warning; GPRS:Link Up; GSM SignalLevel:Strong; GPS:Successful positioning, SVS Used in fix:10(11),GPS Signal Level:32,31,32,31,28,29,29,36,32,33; ACC:OFF;Defense:OFF Query device location WHERE# egCurrent position!Lat:N22.577156,Lon:E113.916748,Course:0.00,Speed:0.00Km/h,DateTime:2013-01-08 17:35:32 Get location URL# eg<01-0817:36>https://maps.google.com/maps?q=N22.577156,E113.916748 Query current location POSITION#OR123 egGPS located: <01-0817:36>https://maps.google.com/maps?q=N22.577156,E113.916748GPS not located: GPS not fixed, please wait for a while, and then try again. Geofence status FENCE# egFenceType:Circle, ON, Latitude:N22.577091,Longitude:E113.916748, radius:600m, in out:IN or OUT, alarm type:1FenceType:Circle, OFF, Latitude:0.000000, Longitude:0.000000, radius:0m, in out:IN or OUT, alarm type:1 Radius:300m;Alarm type:1 Movement query MOVING# egMoving Switch:OFF; Radius:300m; Alarm type:1Moving Switch:ON; Lat:N22.577080; Lon:E113.916794; Related links: GT06N Settings SMS Commands Note: Hashtag (#) is at the end of the code Function Code Reply from GT06N device Set access point APN APN, [apnname]#ORAPN, [apnname],[user],[pwd]# Close automatic APN and set by yourself. APN# Set up automatic access point ASETAPN, [X]# X=ON/OFF;ON: open automatic APN;OFF: close automatic APN. ASETAPN# Connect GT06N to server SERVER,mode,domainName/IP,port,protocol# eg: SERVER,1,www.ydpat.com,8011,0# SERVER,0,211.154.135.113,8011,0# mode = 1 means set with domain name mode = 0 means set with ip address protocol = 0 means connect server with TCP protocol protocol = 1 means connect server with UDP protocol SERVER# Change GT06N time zone GMT,[A],[b],[C]# A：E or W；“E” means eastern time zone, “W” means western time zone；default：EB：0～12；time zone default：8 C：0/15/30/45；half time zone；default：0 GMT# Factory reset “format” GT06N FACTORY# Restore to factory setting GT06N EURL,network links# set the network links for latitude and longitude, default: http://maps.google.com/maps?q= EURL# GPRS ON/OFF GPRSON,X# X=0 or 1; “1” means GPRS ON, “0” means GPRS OFF, default:1 GPRSON# Reboot GT06N RESET# The device would reboot in 20S after receiving the command. Internet blocking alert GPRSALM,X# X=ON/OFF, default: OFF GPRSALM# Set/Delete emergency numbers GT06N SOS,A,[phone number 1][,phone number 2][,phone number 3]# Add SOS phone number. SOS,D,[sequence number 1][, sequence number 2][, ​​sequence number 3]# SOS,[D],[phone number]# SOS# Add center phone number (to stop/start the engine) CENTER,A,[phone number]# CENTER, D# CENTER# Setting heartbeat transmission times HBT,[T1],[T2]# T1 ranges 1~19 (minutes), heartbeat packet upload interval when ACC ON; default is 3; T2 ranges 1~19 (minutes), heartbeat packet upload interval when ACC OFF; default is 5; HBT# Setting data transmission times to GPS server TIMER,[T1],[T2]# T1 ranges 5~18000 or 0 (seconds), upload interval when ACC ON, 0 means no upload, default is 10; T2 ranges 5~18000 (seconds), upload interval when ACC OFF, default is 10; TIMER# Setting data transmission by distance traveled DISTANCE,[D]# D ranges 50~10000 or 0 (meters), distance interval, default is 300; DISTANCE# Set transmission according to diversion angle ANGLEREP,[X][,A][,B]# X=ON/OFF, default：ONA=5～180 degrees, diversion angle degree, default：30 degrees；B=2～5 seconds, detecting time, default：3 seconds, ANGLEREP,OFF# ANGLEREP# Set transmission when engine is on/off ACCREP,[A]# A=ON/OFF, upload for ACC status change, default: ON ACCREP# Set data sending batch BATCH,[A][,N]# A= A=ON/OFF, data sending batch function on or off, default:OFFN=1～50, N means the number of messages in the batch, default：10; BATCH# Set defense status delay DEFENSE,[A]# A= 1～60 (minute), delay of the defense, default：10 (minutes). DEFENSE# Set the vibration sensor detection time, [,B][,C]# A=10-300 seconds, detecting time. Default: 10 secondsB-10-300 seconds, alert delay. Deault:180 secondsC=1-3000 minutes, vibration alert interval. Default: 30 minutes SENSOR# Check the parameter of the status Set the time that the GPS is controlled by the sensor SENDS,[A]# A=0-300(minute), time duration for GPS to work once vibration detected, 0 means GPS always on work, default: 5(minute) SENDS# Turn off the defense status DSRESET# DSRESET# Cancel the current Arm status Clear the data stored in the memory CLEAR# Set the static drift filtering SF,[A][,B]# A=ON/OFF；static drift filtering switch；default: ONB=10-1000(m)；maximal filtering distance；default: 100(m)； SF# Remote vehicle stop code GT06N RELAY,[A]# A=0/1；0 means connection, 1 means cut off；default: 0.

لتفعيل وبرمجة مختلف الأجهزة والحصول على برنامج التتبع تواصل معنا واتساب: +966570960313 ٍSystem Parameters/FMB120 SMS Commands Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 138 Uint8 0 0 8 1 – Ignition Movement source 2 – Accelerometer 4 – GNSS 8 – CAN Speed 133 Uint8 0 0 1 0 – GNSS Speed Source 1 – OBD / CAN 106 Uint8 1 0 1 0 – Disable Static navigation 1 – Enable 112 Uint8 1 0 3 1 – Movement Static navigation source 2 – Ignition 3 – Movement and Ignition 107 Uint8 2 0 2 0 – After Position Fix Send/Save records without TS 1 – Always 2 – After Time Sync 108 Uint8 1 0 1 0 – Disable LED Indication 1 – Enable 109 Uint8 10 1 15 0 – Undefined GNSS source 1 – Beidou only 2 – Glonass only 3 – Glonass and Beidou not allowed 4 – Galileo only 5 – Galileo and Beidou 6 – Galileo and Glonass 7 – Galileo, Glonass and Beidou not allowed 8 – Gps only 9 – Gps and Beidou 10 – Gps and Glonass 11 – Gps, Glonass and Beidou not allowed 12 – Gps and Galileo 13 – Gps, Galileo and Beidou 14 – Gps, Galileo and Glonass 15 – Gps, Galileo, Glonass and Beidou and not allowed 110 Uint8 0 0 1 0 – On need Battery charge mode 1 – After ignition on 113 Uint8 0 0 1 0 – Codec 8 Data Protocol 1 – Codec 8 Extended 135 Uint8 0 0 1 0 – DIN2/AIN1 Input mode 1 – Ground Sense Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 102 Uint8 2 0 4 0 – Disable Sleep settings 1 – GPS sleep 2 – Deep sleep 3 – Online Deep sleep 4 – Ultra Deep sleep 6 – Power Off sleep (only for FMB965) 103 Uint16 1 1 3000 Minutes Timeout                             Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 101 Uint8 4 1 14 1 – DIN 1 Ignition settings 2 – Accelerometer 3 – Digital Input or Accelerometer 4 – Power Voltage 5 – Digital Input or Power Voltage 6 – Accelerometer or Power Voltage 7 – Digital Input, Accelerometer, or Power Voltage 8 – Engine RPM 9 – Digital Input or Engine RPM 10 – Accelerometer or Engine RPM 11 – Digital Input, Accelerometer or Engine RPM 12 – Power Voltage or Engine RPM 13 – Digital Input, Power Voltage or Engine RPM 14 – Accelerometer, Power Voltage or Engine RPM 104 Uint16 30000 0 30000 mV High voltage 105 Uint16 13200 0 29999 mV Low voltage Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 19001 Uint16 5 1 60 Seconds Movement Start Delay 19002 Uint16 60 5 300 Seconds Movement Stop Delay Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 900 Uint8 1 0 3 0 – Gps only Synchronization settings 1 – NITZ and NTP 2 – NTP 3 – NITZ 901 Uint8 0 0 24 Hours NTP Resync 902 Char “avl1.teltonika.lt” 0 55 String NTP server 1 903 Char “pool.ntp.org” 0 55 String NTP server 2 Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 169 Uint8 2 0 2 0 – Disabled Accelerometer Auto Calibration 1 – Once 2 – Continuous 170 Uint8 1 0 1 0 Disabled Gravity Filter 1 Enabled FMB120 System Sarameters SMS Commands ٍGPRS Parameter/FMB120 SMS Commands Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 1000 Uint32 300 30 259200 Seconds Open link timeout 1001 Uint16 30 5 300 Seconds Response timeout 1002 Uint8 0 0 1 0 – Newest Sort by 1 – Oldest 1003 Uint16 0 0 300 Seconds Network ping timeout Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 2000 Uint8 1 0 1 0 – Disable GPRS context 1 – Enable 2001 Char “” 0 32 String APN 2002 Char “” 0 32 String APN username 2003 Char “” 0 32 String APN password Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 2004 Char “” 0 55 String Domain 2005 Uint16 0 0 65535 Number Port 2006 Uint8 1 0 1 0 – TCP Protocol 1 – UDP Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 2010 Uint8 0 0 3 0 – Disable Backup Server Mode 1 – Backup 2 – Duplicate 3 – EGTS 2007 Char “” 0 55 String Backup Server Domain 2008 Uint16 0 0 65535 Number Backup Server Port 2009 Uint8 0 0 1 0 – TCP Backup Server Protocol 1 – UDP Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 13003 Uint8 1 0 1 0 – Disable FOTA WEB Status 1 – Enable 13000 Char fm.teltonika.lt 0 55 String FOTA WEB Domain 13001 Uint16 5000 0 65535 Number FOTA WEB Port 13002 Uint16 720 30 65535 Number FOTA WEB Period GPSR Parameters/FMB120 SMS Commands SMS-Call Settings/FMB120 SMS Commands Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 3000 Uint8 0 0 1 0 – Disable Allow SMS data sending 1 – Enable 3001 Char “” 0 16 String Data Send Number Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 3003 Char “” 0 5 String Login 3004 Char “” 0 5 String Password 3006 Uint16 UTC+00:00 UTC-12:00 UTC+13:00 Time zone SMS event Time Zone Parameter ID Parameter Type Default value Value range Value Parameter name Min Max 3005 Uint8 0 0 4 0 – Do nothing Incoming call action 1 – Hangup 2 – Report position 3 – Spy call 4 – Auto answer Parameter ID Parameter Type Default value Value range