to the server

The best server for the GT06N tracking device and other devices, as it supports more than 150 different types of tracking and locating devices and contains many exclusive features that enable you to track all types of vehicles and manage users with ease and at competitive prices! To order, contact us on WhatsApp: +966570960313 or Trkify@Trkify Telegram Features of the GT06N Server The server contains many features, the most notable of which are: You may also like: How to connect to the GT06N Server The method to connect to the GT06N Server is very easy and takes only 5 minutes, follow the following steps: Technical specifications for the GT06N device GNSS Positioning system GPS+BDS+LBS Positioning accuracy＜2.5m CEP Tracking sensitivity -165dBm Acquisition sensitivity -148dBm TTFF (open sky) Avg. hot start ≤1sec Avg. cold start ≤32sec Cellular Communication network GSM Frequency Quad-band 850/900/1800/1900 MHz Power Battery 450mAh/3.7V industrial-grade Li-Polymer battery Input voltage 9-36VDC Interface LED indication GNSS (Blue), Cellular (Green) , Power (Red) SIM Standard-SIM Data storage 32+32Mb Digital inputs ACC, SOS, input Digital outputs Relay, output Physical specification Dimensions 105.8 x 54.5 x 16.4mm Weight 96g Operating environment Operating temperature –20℃ to +70℃ Operating humidity 5%～95%, non-condensing Feature Voice monitoring range ≤5 meters Sensors Accelerometer Scenarios Vehicle movement alert, Over-speed alert, Geo-fence, Voice monitoring, Power supply disconnection GT06N Specifications To order, contact us on WhatsApp: +966570960313 or Telegram Trkify @

To activate and program various devices and obtain the tracking program, contact us on WhatsApp: +966570960313 Telegram: @Trkify Commands and codes for checking and inquiring GT06N Query SMS Commands No. Function Command/Code Response Explanation 1 Check GT06N firmware version VERSION# eg[VERSION]GT06B_10_8MM_B25_V11_LA [BUILD]2013/01/04 17:45 2 Check GT06N parameters PARAM# egGPS report on time interval：IMEI:868120103643505;TIMER:20,20; SENDS:5; SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1; Defense time:10;TimeZone:E,8,0; GPS report on distance interval：IMEI:868120103643505;Distance:200; SENDS:5; SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1; Defense time:10;TimeZone:E,8,0; 3 Query GT06N network setting GPRSSET# egGPRS:ON; APN:CMNET,,;Server:1,hgt06.szdatasource.com,8841,0;URL:http://maps.google.com/maps?q=; 4 Check GT06N status STATUS# egBattery:3.41V,Battery too low! Warning; GPRS:Link Up; GSM SignalLevel:Strong; GPS:Successful positioning, SVS Used in fix:10(11),GPS Signal Level:32,31,32,31,28,29,29,36,32,33; ACC:OFF;Defense:OFF 5 Check position status WHERE# egCurrent position!Lat:N22.577156,Lon:E113.916748,Course:0.00,Speed:0.00Km/h,DateTime:2013-01-08 17:35: 32 6 Check URL URL# eg<01-0817:36>http://maps.google.com/maps?q=N22.577156,E113.916748 7 Check position POSITION#OR123 egGPS located: <01-0817:36>http://maps .google.com/maps?q=N22.577156,E113.916748GPS not located: GPS not fixed, please wait for a while, and then try again.   8 Check geo fence status FENCE#egFenceType:Circle, ON, Latitude:N22.577091,Longitude:E113.916748, radius:600m, in out:IN or OUT, alarm type:1FenceType:Circle, OFF, Latitude:0.000000, Longitude :0.000000,radius:0m, in out:IN or OUT, alarm type:1 9 Check moving status MOVING# egMoving Switch:OFF; Radius:300m; Alarm type:1 Moving Switch:ON; Lat:N22.577080; Color:E113.916794; Radius:300m;Alarm type:1 GT06N Query SMS Commands Related links: GT06N Settings SMS Commands No. Function Command/Code Response Explanation GT06N SETTING CLASS 1 Set APN APN, [apnname]#ORAPN, [apnname],[user],[pwd]# Close automatic APN and set by yourself. APN# Check the current APN parameters. 2 Set automatic APN ASETAPN, [X]# X=ON/OFF;ON: open automatic APN;OFF: close automatic APN. ASETAPN# Check automatic APN status 3 Set server parameters SERVER,mode,domainName/IP,port,protocol# eg: SERVER,1,www.ydpat.com,8011,0#SERVER,0,211.154.135.113,8011,0#mode = 1 means set with domain namemode = 0 means set with ip address protocol = 0 means connect server with TCP protocolprotocol = 1 means connect server with UDP protocol SERVER# Check the current sever parameters 4 Set GMT parameter For GT06N GMT,[A],[b],[C]# A：E or W；”E” means eastern time zone , “W” means western time zone；default：EB：0～12；time zone default：8C：0/15/30/45；half time zone；default：0 GMT# Check the current time zone parameters 5 Restore GT06N to factory FACTORY# Restore to factory setting 6 Edit URL EURL,network links# set the network links for latitude and longitude, default: http://maps.google.com/maps?q= EURL# Check the current URL 7 GPRS switch GPRSON,X# current GPRS status 0 Reboot GT1N RESET# The device would reboot in 1S after receiving the command. 9 GPRS blocking alarm GPRSALM,X# phone number. SOS,D,[sequence number 1][, sequence number 2][, ​​sequence number 3]# Delete the phone number according to the sequence number. SOS,[D],[phone number]# Delete the matching SOS phone number. SOS# Check the SOS phone number. 11 Center phone number setting CENTER, A, [phone number]# Add center phone number. CENTER, D# Delete center phone number. CENTER# Check the center phone number. 12 Heartbeat interval setting HBT,[T1],[T2]# T1 ranges 1~19(minutes), heartbeat package upload interval when ACC ON; default is 3;T2 ranges 1~19 (minutes), heartbeat packet upload interval when ACC OFF; default is 5; HBT# Check the current parameters of T1 and T2. 13 Set GPS data sending interval TIMER,[T1],[T2]# T1 ranges 5~18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 10;T2 ranges 5~18000 (seconds) , upload interval when ACC OFF, default is 10; TIMER# Check the current parameters of T1 and T2. 14 Set distance interval of GPS data sending DISTANCE,[D]# D ranges 50~10000 or 0(meters), distance interval, default is 300; DISTANCE# Check the current distance interval. 15 Set the angle upload ANGLEREP,[X][,A][,B]# detecting time, default: 5 seconds, ANGLEREP,OFF# Close the angle upload. ANGLEREP# Check the angle upload status and its parameters. 16 Set the upload for ACC status change ACCREP,[A]# A=ON/OFF, upload for ACC status change, default: ON ACCREP# Check the upload for ACC status change. 17 Set the GPS data sending batch BATCH,[A][,N]# A= A=ON/OFF, data sending batch function on or off, default:OFFN=1～50, N means the number of messages in the batch , default：10； BATCH# Check the number of messages in a batch. 18 Set the delay of the defense DEFENSE,[A]# A= 1～60 (minutes), delay of the defense, default：10 (minutes). DEFENSE# Check the parameters of the defense. 19 Set vibration sensor detecting time SENSOR, ,[,B][,C]# A=10-300 seconds,detecting time. Default: 10 secondsB-10-300 seconds, alert delay. Deault:180 seconds C=1-3000 minutes, vibration alert interval. Default: 30 minutesSENSOR# Check the parameter of the status 20 Set the GPS controlled time by sensor SENDS,[A]# A=0-300(minute), time duration for GPS to work once vibration detected, 0 means GPS always on work , default: 5(minute) SENDS# Check the parameters of the time. 21 Disarm DSRESET# DSRESET# Cancel the current Arm status 22 Clear the backup data CLEAR# 23 Set the static data filtering SF,[A][,B]# A=ON/OFF；static drift filtering switch；default: ONB=10 -1000(m)；maximal filtering distance；default: 100(m)；SF# Check the parameters. 24 Set the petrol/electricity control RELAY,[A]# A=0/1；0 means connection, 1 means cut off；default: 0. RELAY# Check the status of the control.