Wireless Portable Tracking Device

Features of the PG12 GPS Tracker: Small size, Live tracking, Voice recording, Track storage, Magnet for installation, Geo-fence setting, Battery capacity 500 mAh, Location accuracy 2 to 10 meters, Temperature tolerance -20 to 70 degrees Celsius, Network type: 2G, You may also like: - How to activate the GT06N GPS Tracker - Tracking program for all types of devices - How to activate the GF-07 device for tracking and audio monitoring - How to activate the tracker For help in activating and programming the device remotely, contact us at +966570960313

The GF-07 tracking and voice recording device is one of the most famous and widely used car tracking devices, as it includes tracking, locating, recording and monitoring sounds. The following is how to activate and use the device and a list of codes and text commands to benefit from the features of the GF07 device: Note: We have no relationship with the manufacturers or sellers of the device, and our role is limited to spreading knowledge of ways to activate various tracking devices. Activating and operating the GF-07 device: Insert the chip and memory card into the device, the device will start automatically and the red light will flash 4 times or for 30 seconds and then turn off. This means that the device is ready for use. If the red light does not go out, this means that either you have a low battery or the chip is incompatible or not installed properly. Activate the device for the first time by sending the FACTORY# command in a text message to the chip number inside the device from your mobile phone. List of codes and text commands for the GF-07 device: List of codes and text commands for the GF-07 device. To send the codes, send a text message to the SIM card number inside the device: 000: Link a main number to the device and the device will respond to calls from this number only. When the code is sent, the device responds with confirmation of receipt of the code and the main number as in the image below 555: Record sound (the device starts recording the surrounding sound and storing it on the memory card) 777: Get the current location of the device via a text message containing a Google Maps link. If the device does not receive a satellite signal, you will receive a message in Chinese, which means that the device is unable to receive the GPS signal and determine the location. Try placing the device next to a window or outdoors and make sure there is no barrier between the device and the sky. 666: Monitor the sound so that the device calls the main number that was linked at the beginning of activation if the sound strength surrounding the device exceeds 40 decibels. 445: Delete the memory content. 888: Check the status of the device, battery charge level, signal strength, memory card capacity, etc. 999: Restart the GF07 device. 444: Reset the device and cancel all previously sent codes (except code 000) FACTORY# Factory reset and clear all settings (resend code 000 after sending this code) Hear the sounds surrounding the device To hear the sounds surrounding the device, call the chip number inside the device from the main number that was linked when activating the device and the device will open the line so that you can hear the sounds. You may also like: Frequent problems and how to solve them: 1- Not getting any response from the GF07 device: In case Not getting a response from the device when sending codes via text messages Make sure of the following: Most of the problems of GF07 not responding are due to the chip. To avoid this problem, try the chip first before placing it inside the device and insert it into a regular mobile device, then send text messages to and from it to make sure that it works normally and sends and receives messages. 2- The GF-07 device is not connecting to the application: The device’s inability to connect to the application may be due to a problem with the APN access point or due to the lack of sufficient internet balance in the chip: or the device does not support the service provider for the chip. 3- The GF07 device is not charging: A SIM card must be inserted into the device for the GF07 device to start charging. Make sure to insert the chip correctly and the device will charge normally. The most prominent disadvantages of the GF-07 tracking device: