text commands

To activate and program various devices and obtain the tracking program, contact us on WhatsApp: +966570960313 Commands and codes for checking and inquiring GT06N Query SMS Commands No. Function Command/Code Response Explanation 1 Check GT06N firmware version VERSION# eg[VERSION]GT06B_10_8MM_B25_V11_LA [BUILD]2013/01/04 17:45 2 Check GT06N parameters PARAM# egGPS report on time interval：IMEI:868120103643505;TIMER:20,20; SENDS:5; SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1; Defense time:10;TimeZone:E,8,0; GPS report on distance interval：IMEI:868120103643505;Distance:200; SENDS:5; SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1; Defense time:10;TimeZone:E,8,0; 3 Query GT06N network setting GPRSSET# egGPRS:ON; APN:CMNET,,;Server:1,hgt06.szdatasource.com,8841,0;URL:https://maps.google.com/maps?q=; 4 Check GT06N status STATUS# egBattery:3.41V,Battery too low! Warning; GPRS:Link Up; GSM SignalLevel:Strong; GPS:Successful positioning, SVS Used in fix:10(11),GPS Signal Level:32,31,32,31,28,29,29,36,32,33; ACC:OFF;Defense:OFF 5 Check position status WHERE# egCurrent position!Lat:N22.577156,Lon:E113.916748,Course:0.00,Speed:0.00Km/h,DateTime:2013-01-08 17:35: 32 6 Check URL URL# eg<01-0817:36>https://maps.google.com/maps?q=N22.577156,E113.916748 7 Check position POSITION#OR123 egGPS located: <01-0817:36>https://maps.google.com/maps?q=N22.577156,E113.916748GPS not located: GPS not fixed, please wait for a while, and then try again.   8 Check geo fence status FENCE#egFenceType:Circle, ON, Latitude:N22.577091,Longitude:E113.916748, radius:600m, in out:IN or OUT, alarm type:1FenceType:Circle, OFF, Latitude:0.000000, Longitude :0.000000,radius:0m, in out:IN or OUT, alarm type:1 9 Check moving status MOVING# egMoving Switch:OFF; Radius:300m; Alarm type:1 Moving Switch:ON; Lat:N22.577080; Color:E113.916794; Radius:300m;Alarm type:1 GT06N Query SMS Commands Related links: GT06N Settings SMS Commands No. Function Command/Code Response Explanation GT06N SETTING CLASS 1 Set APN APN, [apnname]#ORAPN, [apnname],[user],[pwd]# Close automatic APN and set by yourself. APN# Check the current APN parameters. 2 Set automatic APN ASETAPN, [X]# X=ON/OFF;ON: open automatic APN;OFF: close automatic APN. ASETAPN# Check automatic APN status 3 Set server parameters SERVER,mode,domainName/IP,port,protocol# eg: SERVER,1,www.ydpat.com,8011,0#SERVER,0,211.154.135.113,8011,0#mode = 1 means set with domain namemode = 0 means set with ip address protocol = 0 means connect server with TCP protocolprotocol = 1 means connect server with UDP protocol SERVER# Check the current sever parameters 4 Set GMT parameter For GT06N GMT,[A],[b],[C]# A：E or W；”E” means eastern time zone , “W” means western time zone；default：EB：0～12；time zone default：8C：0/15/30/45；half time zone；default：0 GMT# Check the current time zone parameters 5 Restore GT06N to factory FACTORY# Restore to factory setting 6 Edit URL EURL,network links# set the network links for latitude and longitude, default: https://maps.google.com/maps?q= EURL# Check the current URL 7 GPRS switch GPRSON,X# current GPRS status 0 Reboot GT1N RESET# The device would reboot in 1S after receiving the command. 9 GPRS blocking alarm GPRSALM,X# phone number. SOS,D,[sequence number 1][, sequence number 2][, ​​sequence number 3]# Delete the phone number according to the sequence number. SOS,[D],[phone number]# Delete the matching SOS phone number. SOS# Check the SOS phone number. 11 Center phone number setting CENTER, A, [phone number]# Add center phone number. CENTER, D# Delete center phone number. CENTER# Check the center phone number. 12 Heartbeat interval setting HBT,[T1],[T2]# T1 ranges 1~19(minutes), heartbeat package upload interval when ACC ON; default is 3;T2 ranges 1~19 (minutes), heartbeat packet upload interval when ACC OFF; default is 5; HBT# Check the current parameters of T1 and T2. 13 Set GPS data sending interval TIMER,[T1],[T2]# T1 ranges 5~18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 10;T2 ranges 5~18000 (seconds) , upload interval when ACC OFF, default is 10; TIMER# Check the current parameters of T1 and T2. 14 Set distance interval of GPS data sending DISTANCE,[D]# D ranges 50~10000 or 0(meters), distance interval, default is 300; DISTANCE# Check the current distance interval. 15 Set the angle upload ANGLEREP,[X][,A][,B]# detecting time, default: 5 seconds, ANGLEREP,OFF# Close the angle upload. ANGLEREP# Check the angle upload status and its parameters. 16 Set the upload for ACC status change ACCREP,[A]# A=ON/OFF, upload for ACC status change, default: ON ACCREP# Check the upload for ACC status change. 17 Set the GPS data sending batch BATCH,[A][,N]# A= A=ON/OFF, data sending batch function on or off, default:OFFN=1～50, N means the number of messages in the batch , default：10； BATCH# Check the number of messages in a batch. 18 Set the delay of the defense DEFENSE,[A]# A= 1～60 (minutes), delay of the defense, default：10 (minutes). DEFENSE# Check the parameters of the defense. 19 Set vibration sensor detecting time SENSOR, ,[,B][,C]# A=10-300 seconds,detecting time. Default: 10 secondsB-10-300 seconds, alert delay. Deault:180 seconds C=1-3000 minutes, vibration alert interval. Default: 30 minutesSENSOR# Check the parameter of the status 20 Set the GPS controlled time by sensor SENDS,[A]# A=0-300(minute), time duration for GPS to work once vibration detected, 0 means GPS always on work , default: 5(minute) SENDS# Check the parameters of the time. 21 Disarm DSRESET# DSRESET# Cancel the current Arm status 22 Clear the backup data CLEAR# 23 Set the static data filtering SF,[A][,B]# A=ON/OFF；static drift filtering switch；default: ONB=10 -1000(m)；maximal filtering distance；default: 100(m)；SF# Check the parameters. 24 Set the petrol/electricity control RELAY,[A]# A=0/1；0 means connection, 1 means cut off；default: 0. RELAY# Check the status of the control.