TK100 GPS Tracker

1- Insert the GSM SIM card correctly, connect it to the 12V/24V power supply,
2- Turn on the small switch inside the SIM card slot
3 - Place the device outside, about 45-90 seconds until the three lights continue to light
4 - Call the SIM number inside the device. The device will disconnect the call and send a message with the location details

The TK100 GPS device can be installed anywhere inside the vehicle that has a power source, preferably one of these places: inside the dashboard, in front of the driver, behind the rear window, inside the trunk, at the driver’s entrance

Care must be taken to install the device so that the front side of the device is facing the sky to ensure accurate acquisition of the satellite signal

The device supports installation of:
1 - Remote immobilizer device
2- A microphone to listen to the device’s surroundings
3 - Emergency button, which enables the driver to send an alert to request help

To track the TK100 GPS device via the application, you must set the server address (IP) and adjust the access point settings (APN) by sending a text message to the chip number inside the device.
To activate text messages for the first time, send: begin#password
To specify the admin number, send: admin#password#cell phone number# (The device will only respond to the number you specify)
Server settings command: IP#123456#116.205.4.114#8169 (Replace the server address in the example with your server address)
Point and access settings command: apn#123456#APN of operator#A (Replace the data with the name of the access point of your SIM service provider)
To obtain a unique tracking program, contact us on WhatsApp: +966570960313

1 - To track and locate the device once via text messages, send: #smslink#123456# The device will respond with a link to Google Maps, vehicle speed, and device number as shown in the picture
2 - To receive a continuous location message, send: at#30#sum#0. In this example, the device sends a location message every 30 seconds, and you can change the duration as needed.

To listen to what is happening around the device using the microphone, send from the admin number: #monitor#password#, then call the device and it will open the line.
To contact the driver, send: #call#password#, and the device will alert the driver that a call has come in. To open the line, you must press the emergency button.

1- Change the default password: “#password#old password#new password#”rd
2- Alarm when the engine is running: “#ACC#ON#”
3- Engine shutdown alert: “#ACC#OFF#”
4- Stop the engine remotely: “#stopoil#password#” or “#stopelec#password#”
5- Remote engine restart: “#supplyoil#password#” or “#supplyelec#password#”

Tg
Dim. 97 mm x 51 mm x 15 mm
Weight 80g
Network GSM/GPRS/GPS
Band 850/900/1800/1900Mhz
GPS chip MT3336
GSM module MTK6260D
GPS sensitivity -159dBm
GPS accuracy 10m
Time To First Fix
Cold status 45s-90s
Warm status 50s
Hot status 15s
Working voltage 12V-24V
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +55°C
Humidity 15%–95%