How to activate ST-901 GPS Tracker
Table of contents
Explain method Activation The ST-901 GPS Tracker is one of the best Vehicle tracking devices From Sinotruk, which is easy to install and highly durable.
To get a special tracking software for the ST-901 from Trakify at a competitive price, contact us:
ST-901 GPS Tarcker Installation
Insert the chip into the designated place according to the mentioned direction.
- Connect the red wire to a constant power source.
- Black wire ground (diamond)
- Yellow or orange wire (depending on model) on the switch power source (contact) Power source when the engine is running
ST901 GPS Device Lights
blue light = GPS light
unsteady flashing = Unable to receive GPS signal
constant light = GPS signal is excellent
Activate ST-901 GPS Tracker
The ST-901 GPS is activated by: text commands And the codes by sending a text message to the chip number inside the device after turning it on
- The default password for text commands is 0000 It is sent with all codes.
ST-901 GPS Tracker Commands and Codes
- Modify the default password
To change the default password, send:
77712340000
- 777 = code symbol
- 1234 = New password
- 0000 = old password
If the code is executed successfully, the device will respond with the phrase: SET OK
- Set admin number
Admin number is authorized to send messages and handle ST-901 GPS Tracker (you can specify 3 admin numbers) To set the number send:
05111111110000 1
- 0511111111 = Mobile number
- 0000 = Password
- 1 = Sort the mobile number from 3 (the device accepts 3 admin numbers)
If the code is executed successfully, the device will respond with the phrase: SET OK
- Choose how the device works
The ST-901 GPS Tracker works in two ways:
1- Offline via text messages, so you send a location command when needed and the device responds with location details and a Google Maps link.
To activate SMS tracking, send:
7000000
- 700 = code symbol
- 0000 = Password
If the code is executed successfully, the device will respond with the phrase: SET OK
2- Direct tracking of movements via the application, which requires activating the Internet package on the SIM card and downloading the device’s application from here: SinoTrack – GPS Tracking System
To activate live tracking of the ST-901 GPS device send:
7100000
- 710 = code symbol
- 0000 = Password
If the code is executed successfully, the device will respond with the phrase: SET OK
– Location via text message
6690000
- 669 = code symbol
- 0000 = Password
The device will respond with:
- Google Maps Link
- date and time
- Device number
- Vehicle speed
- Battery charging status
Related articles:
- Programming the device to send a daily report
You can program the ST-901 GPS Tracker to send a text message with location details to the admin number at a specific time every day. To activate the feature, the country's time zone must be set so that the message timing is correct (example: Saudi Arabia time is +03 GMT). The default time for the device is 00 GMT.
– Adjusting the timing of the ST-901 device
896000 E03
- 896 = code symbol
- 0000 = Password
- E East (W for West)
- 03 = Country time zone
If the code is executed successfully, the device will respond: SET OK time zone is 8960000 03
– Set daily site report
This command is set once and the device will send a message with the location details at the same time every day. In this example, the device sends the message every day at 1:XNUMX pm. To set it, send:
66500001330
- 665 = code symbol
- 0000 = Secret number
- 1330 = 1:30 p.m. (24-hour format)
- Cancel daily report message
6650000OFF
- 665 = code symbol
- 0000 = Password
- OFF = Stop
– Locate by calling
If you call the SIM card number inside the device, the line will be closed and a text message with location details and a Google Maps link will be sent to the calling number.
– Set speed alert
122000 120
- 122 = code symbol
- 0000 = Password
- 120 = speed limit
– Device low battery alert
You can set the device to send a text message or call the admin number when the battery level drops from 5 (highest level) to 1 (lowest level).
To contact when the level drops to 1 send:
1500000
- 150 = Calling code symbol
- 0000 = Password
To send a text message when the battery is low send
1510000
- 151 = code symbol
- 0000 = Password
– Restart the device remotely
To restart send: RESTART
Activate ST-901 GPS Tracker
The ST-901 GPS Tracker comes with SINOTrack application for live tracking via mobile. To activate the tracking program, the SIM card must be equipped with an internet package.
You can download the application from here: SinoTrack – GPS Tracking System
To get a special tracking program with the ability to track more than one device, contact us:
