1- Charge the device fully (charging time ranges from 3 to 8 hours depending on the battery capacity)
2- Insert the mobile SIM card into the designated place, then press the power button for 3 seconds until the lights turn on (make sure the SIM card has internet credit). If there is no power button, the device will turn on automatically when the SIM card is inserted.

Blue light = mobile network
– Flashing quickly = presence of signal
– Flashing slowly = no GPRS network
– Constant flashing = no SIM card (the device does not recognize the SIM card)

Green light = GPS satellite signal
– Flashing quickly = satellite signal found
– Flashing slowly = Satellite signal not found

Red light = battery
The red light lights up steadily during charging and turns off when charging is complete and the device is operating normally

Download the PG12 device app on your phone

To download on an Android device from Google Play: Click here
To download on iPhone from the Apple Store: Click here

Open the application and enter the serial number of the PG12 GPS device in the user name field, then enter the default password 123456

When you open the application, the map and location of the device appear to you, and you can change the language from your account page. You can also track the device directly, repeat previous tracks, see the battery charge level, record audio, and other features.

There are two audio recording modes: manual and automatic

Manual mode:

Step 1: First click on “Job” in the main menu.
Step 2: Click on “Registered”.
Step 3: Select recording time: This mode does not record automatically, so you need to restart it every time you finish recording.

For example, if you choose a recording time of 20 seconds, recording will not continue after 20 seconds of recording is complete. If you want to continue recording, you need to repeat steps 1, 2 and 3 to restart recording.

Automatic mode:

There are two sensing methods in automatic mode, one is voice control and the other is vibration sensing.

Step 1: First click on “Job” in the main menu.
Step 2: "the situation".
Step 3: Select voice/vibration control.
Step 4: Recording time selection: This mode is automatic recording, so it will continue automatically after each recording is completed. For example, if you choose 10 seconds, the PG12 GPS will record the audio content for 10 seconds and then send it to you and every 10 seconds you will receive 10 seconds of audio recording from the device. But this will consume a lot of power. So, it is recommended to use the recording function only in emergency situations.

Master number link code to control the device and listen to surrounding sounds:

000 # 0096612345678 #

You can set a maximum of 3 numbers and when you want to hear the sounds, call from one of the numbers on the device and it will open the microphone

Code to record ambient sounds for 10 minutes and save them to the memory card: 111

Code to automatically record votes when the strength of the votes exceeds 60 points for ten minutes and send them to the application (each file is one minute): 222

Code to call the main number when the voice strength exceeds 60 points: 333

Code to send a text message alert to the main number when any vibration is detected: 666

Device location code (the device sends a text message containing a link to the device’s location): 999

Device reboot code: SYSRST#

Lights off code:
LED#off

Lights Restart Code:
LED#on

Factory reset code to erase all commands and settings from the device: 1122