How to activate the GT06N GPS Tracker
content list
In this article, you will learn how to activate the GT06N tracking device, step by step to the server one of the bset Vehicle tracking devices that was ever manufactured and is known for its durability, stability of the internal operating system (Firmware), and ease of tracking via application or text messages.
To activate and program various devices and obtain the tracking program Contact us on WhatsApp: +966570960313
Features of GT06N:
- Live tracking online via the app
- Offline tracking via text messages
- Remote engine stop
- Recognizing whether the engine is on/off
- External microphone to hear surrounding sounds
- Emergency button
- Internal backup battery
- Multiple alerts: speeding, geo-fences, engine start/stop, etc
You may also like:
- The best tracking software for various types of devices
- How to activate the PG12 tracking device
- Commands and scripts for the FMB120 tracker
- List of Codes and SMS Commnds for GT06N
- How to activate the tracking device
Installation and activation of the GT06N tracking device:
- Choose the location to install the device that is appropriate for you, suggested places include: behind the dashboard, behind the stereo, in front of the passenger seat, under the rear window, under the driver’s entrance.
- Insert the SIM into the designated place, make sure that there is no PIN Code on the SIM, and make sure that there is a balance inside the SIM in order to receive confirmation messages from the device.
- If you want to track through the application, make sure you have an internet balance (the device consumes approximately 30 to 50 MB of data per month). Use the codes below to activate the device and get the location.
GT06N Activation and Tracking Codes:
The codes are sent via text messages to the SIM number inside the device
- Link your mobile number to the device: CENTER, A, [phone number]#
- Set listening numbers for the device's surroundings and emergency: SOS, A,[phone number 1][,phone number 2][,phone number 3]#
- To listen to surrounding sounds, call from one of the numbers set in the previous step
- Locate using Google Maps link: URL#
- Get the Device location:: POSITION# or 123
- Stop engine: RELAY,1#
- Engine restart: RELAY,0#
- Factory reset: FACTORY#
- Check device status: STATUS#
- You can view all the codes here: SMS Commands GT06N activation codes
Activate the tracking device via the application:
Download the application, register the device's serial number, and send the following codes (Contact us to get the application) :
- Set server address: SERVER,mode,domainName/IP,port,protocol#
- Set access point APN: APN, [apnname]#
- If the access point has a username and password: APN, [apnname],[user],[pwd]#
- To verify the server settings and APN, send GPRSSET#
GT06N technical specifications
| GNSS | |
| Positioning system | GPS+BDS+LBS |
| Positioningaccuracy | ＜2.5m CEP |
| Tracking sensitivity | -165dBm |
| Acquisition sensitivity | -148dBm |
| TTFF (open sky) | Avg. hot start ≤1sec Avg. cold start ≤32sec |
| Cellular | |
| Communication network | GSM |
| Frequency | Quad-band 850/900/1800/1900 MHz |
| Power | |
| Battery | 450mAh/3.7V industrial-grade Li-Polymer battery |
| Input voltage | 9-36VDC |
| Interface | |
| LED indication | GNSS (Blue), Cellular (Green), Power (Red) |
| SIMs. | Standard SIM |
| Data storage | 32+32Mb |
| digital inputs | ACC, SOS, input |
| digital outputs | Relay, output |
| Physical specifications | |
| Size | 105.8 54.5 x x 16.4mm |
| Weight | 96g |
| operating environment | |
| Operating temperature | –20℃ to +70℃ |
| Operating humidity | 5%～95%, non-condensing |
| Features | |
| Voice monitoring range | ≤5 metres |
| Sensors | Accelerometer |
| Scenarios | Vehicle movement alert, Over-speed alert, Geo-fence, Voice monitoring, Power supply disconnection |
Specifications
