SMS Commands GT06N Vehicle Tracking Device Activation Codes
To activate and program various devices and obtain the tracking program, contact us on WhatsApp: 966570960313+ Telegram: @Trkify
GT06N Query commands and codes SMS Commands
| No. | Occupation | Command/code | Reply | Explanation |
| 1 | Check GT06N firmware version | VERSION# | e.g.[VERSION]GT06B_10_8MM_B25_V11_LA [BUILD]2013/01/04 17:45 | |
| 2 | Check GT06N parameters | PARAM# | eg GPS report on time interval： IMEI:868120103643505;TIMER:20,20; SENDS:5; SOS:13730454825,,; Center Number:;Sensorset:10,1,5,1; Defense time:10; TimeZone:E,8,0; GPS report on distance interval： IMEI:868120103643505;Distance:200; SENDS:5; SOS:13730454825,,; Center Number:;Sensorset:10,1,5,1; Defense time:10; TimeZone:E,8,0; | |
| 3 | Query GT06N network setting | GPRSSET# | egGPRS:ON; APN:CMNET,,; Server:1,hgt06.szdatasource.com,8841,0; URL:http://maps.google.com/maps?q=; | |
| 4 | Check GT06N status | STATUS# | egBattery:3.41V,Battery too low! Warning; GPRS:Link Up; GSM Signal Level:Strong; GPS:Successful positioning, SVS Used in fix:10(11), GPS Signal Level:32,31,32,31,28,29,29,36,32,33; ACC:OFF; Defense:OFF | |
| 5 | Check position status | WHERE# | egCurrent position! Lat:N22.577156,Color:E113.916748,Course:0.00,Speed:0.00Km/h,Date Time:2013-01-08 17:35:32 | |
| 6 | Check URL | URL# | eg<01-08 17:36>http://maps.google.com/maps?q=N22.577156,E113.916748 | |
| 7 | Check position | POSITION# OR 123 | eg GPS location: <01-08 17:36>http://maps.google.com/maps?q=N22.577156,E113.916748 GPS not located: GPS not fixed, please wait for a while, and then try again. | |
| 8 | Check geo fence status | FENCE# | egFenceType:Circle, ON, Latitude:N22.577091, Longitude:E113.916748, radius:600m, in out:IN or OUT, alarm type:1 FenceType:Circle, OFF, Latitude:0.000000, Longitude:0.000000, radius:0m, in out:IN or OUT, alarm type:1 | |
| 9 | Check moving status | MOVING# | egMoving Switch:OFF; Radius:300m; Alarm type:1 Moving Switch:ON; Lat:N22.577080; Color:E113.916794; Radius:300m; Alarm type:1 |
Related Links:
GT06N Settings SMS Commands
| No. | Occupation | Command/code | Reply | Explanation |
| GT06N SETTING CLASS | ||||
| 1 | Set APN | APN, [apnname]# OR APN, [apnname],[user],[pwd]# | Close automatic APN and set by yourself. | |
| APN# | Check the current APN parameters. | |||
| 2 | Set automatic APN | ASETAPN, [X]# | X=ON/OFF; ON: open automatic APN; OFF: close automatic APN. | |
| ASETAPN# | Check automatic APN status | |||
| 3 | Set server parameters | SERVER,mode,domainName/IP,port,protocol# | eg: SERVER,1,www.ydpat.com,8011,0# SERVER,0,211.154.135.113,8011,0# mode = 1 means set with domain name mode = 0 means set with ip address protocol = 0 means connect server with TCP protocol protocol = 1 means connect server with UDP protocol | |
| SERVER# | Check the current saving parameters | |||
| 4 | Set GMT parameter For GT06N | GMT,[A],[b],[C]# | A：E or W；”E” means eastern time zone, “W” means western time zone；default：E B：0～12；time zone default：8 C：0/15/30/45；half time zone；default：0 | |
| GMT# | Check the current time zone parameters | |||
| 5 | Restore GT06N to factory | FACTORY# | Restore to factory setting | |
| 6 | Edit URL | EURL,network links# | set the network links for latitude and longitude, default: http://maps.google.com/maps?q= | |
| EURL# | Check the current URL | |||
| 7 | GPRS Switch | GPRSON,X# | X=0 or 1;”1″ means GPRS ON, “0” means GPRS OFF, default:1 | |
| GPRSON# | Check the current GPRS status | |||
| 8 | Reboot GT06N | RESET# | The device would reboot in 20S after receiving the command. | |
| 9 | GPRS blocking alarm | GPRSALM,X# | X=ON/OFF, default: OFF | |
| GPRSALM# | Check the GPRS alarm status | |||
| 10 | SOS setting | SOS,A,[phone number 1][,phone number 2][,phone number 3]# | Add SOS phone number. | |
| SOS,D,[sequence number 1][, sequence number 2][,sequence number 3]# | Delete the phone number according to the sequence number. | |||
| SOS,[D],[phone number]# | Delete the matching SOS phone number. | |||
| SOS# | Check the SOS phone number. | |||
| 11 | Center phone number setting | CENTER, A, [phone number]# | Add center phone number. | |
| CENTER, D# | Delete center phone number. | |||
| CENTER# | Check the center phone number. | |||
| 12 | Heartbeat interval setting | HBT,[T1],[T2]# | T1 ranges 1~19(minutes), heartbeat packet upload interval when ACC ON; default is 3; T2 ranges 1~19 (minutes), heartbeat packet upload interval when ACC OFF; default is 5; | |
| HBT# | Check the current parameters of T1 and T2. | |||
| 13 | Set GPS data sending interval | TIMER,[T1],[T2]# | T1 ranges 5~18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 10; T2 ranges 5~18000 (seconds), upload interval when ACC OFF, default is 10; | |
| TIMER# | Check the current parameters of T1 and T2. | |||
| 14 | Set distance interval of GPS data sending | DISTANCE,[D]# | D ranges 50~10000 or 0(meters), distance interval, default is 300; | |
| DISTANCE# | Check the current distance interval. | |||
| 15 | Set the angle upload | ANGLEREP,[X][,A][,B]# | X=ON/OFF, default：ON A=5～180 degrees, diversion angle degree, default：30 degrees； B=2～5 seconds, detecting time, default：3 seconds, | |
| ANGLEREP,OFF# | Close the angle upload. | |||
| ANGLEREP# | Check the angle upload status and its parameters. | |||
| 16 | Set the upload for ACC status change | ACCREP,[A]# | A=ON/OFF, upload for ACC status change, default: ON | |
| ACCREP# | Check the upload for ACC status change. | |||
| 17 | Set the GPS data sending batch | BATCH,[A][,N]# | A= A=ON/OFF, data sending batch function on or off, default:OFF N=1～50, N means the number of messages in the batch, default：10； | |
| BATCH# | Check the number of messages in a batch. | |||
| 18 | Set the delay of the defense | DEFENSE,[A]# | A= 1～60 (minute), delay of the defense, default: 10 (minutes). | |
| DEFENSE# | Check the parameters of the defense. | |||
| 19 | Set vibration sensor detecting time | SENSOR, ,[,B][,C]# | A=10-300 seconds, detecting time. Default: 10 seconds B-10-300 seconds, alert delay. Deault:180 seconds C=1-3000 minutes, vibration alert interval. Default: 30 minutes SENSOR# Check the parameter of the status | |
| 20 | Set the GPS time controlled by sensor | SENDS,[A]# | A=0-300(minute), time duration for GPS to work once vibration detected, 0 means GPS always on work, default: 5(minute) | |
| SENDS# | Check the parameters of the time. | |||
| 21 | disarm | DSRESET# | DSRESET# Cancel the current Arm status | |
| 22 | Clear the backup data | CLEAR# | ||
| 23 | Set the static data filtering | SF,[A][,B]# | A=ON/OFF；static drift filtering switch；default: ON B=10-1000(m)；maximal filtering distance；default: 100(m)； | |
| SF# | Check the parameters. | |||
| 24 | Set the petrol/electricity control | RELAY,[A]# | A=0/1；0 means connection, 1 means cut off；default: 0. | |
| RELAY# | Check the status of the control. | |||
| 25 | Set delay time of voice monitor | DELAY, # | A=0、5-18 seconds; Default: 10 seconds (Enter Listen-In after 10 senconds calling) | |
| 26 | Set the fence alarm | FENCE,[B],0,[D],[E],[F],[X],[M]# | circle area; B=ON/OFF, open or close fence alarm, default: close; D=the latitude of the circle center; E=the longitude of the circle center; F=1～9999, the fence radius, unit: 100 meters; X = in/out ； in: Alarming where get in the fence, out: alarming where get out the fence, blank Means Both Alarming When Get in or Get Out the Fence, Default: Blank. M=0/1；way of alarming, 0: GPRS only, 1: SMS+GPRS, default: 1 | |
| FENCE,[B],1,[D],[E],[F],[G][,X][,M]# | rectangle area B=ON/OFF, open or close fence alarm, default: close; D=the latitude of the position 1；range：-90 ～90(degree)； E=the longitude of the position 1；range：-180 ～180(degree)； F=the latitude of the position 2；range：-90 ～90(degree)； G=the longitude of the position 2；range：-180 ～180(degree)； the latitude supports “N/S” or “+/-” coming before it’s value； the longitude supports “E/W” or “+/-” coming before it’s value；； | |||
| FENCE# | Check the parameters of the fence. | |||
| 27 | Set the vibration alarm | SENALM,[A][,M]# | A=ON/OFF, default: OFF; M=0/1/2, way of alarming, 0 :GPRS only, 1: SMS+GPRS, 2 : GPRS+SMS+phone call, default:1 | |
| SENALM,OFF# | Close vibration alarm | |||
| #SENALM | Check the parameters of the alarm | |||
| 28 | Set the power cut-off alarm | POWERALM, [A][,M][,T1][,T2]# | A=ON/OFF, default：ON; M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default：1； T1=2～60 (second), default：5； T2=1～3600 (second), default：300； | |
| POWERALM, OFF# | Close the power alarm. | |||
| POWERALM# | Check the parameters of the alarm. | |||
| 29 | Set the low battery alarm | BATALM, [A][, M]# | A=ON/OFF, default：ON; M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default：1； | |
| BATALM,OFF# | Close the low battery alarm. | |||
| BATALM# | Check the parameters of the alarm. | |||
| 30 | Set the SOS alarm | SOSALM,[A],[M]# | A=ON/OFF, default：ON; M=0/1/2, way of alarming, 0 :GPRS only, 1: SMS+GPRS, 2 : GPRS+SMS+phone call, default：1； | |
| SOSALM,OFF# | Close the SOS alarm. | |||
| SOSALM# | Check the parameters of the alarm. | |||
| 31 | Set the dialing times | CALL,N# | N=1～3, default：3, times to dial all numbers; | |
| CALL# | Check the parameters of the dialing. | |||
| 32 | Set the moving alarm | MOVING,[A][,R][,M]# | A=ON/OFF, default：OFF; R=100～1000, moving radius, unit: meter, default: 300； M=0～2, 0: GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default：1； | |
| MOVING,OFF# | Close the moving alarm. | |||
| MOVING# | Check the status and parameters of the moving alarm. | |||
| 33 | Set the overspeed alarm | SPEED,[A][,B][,C][,M]# | A=ON/OFF, open or close over speed alarm, default:OFF B=5～600 (second), time interval, default: 20 (second) C=1～255(km/h), speed limit, default：100(km/h); M=0/1, way of alarm, 0: GPRS only, 1: SMS+GPRS, default：1. | |
| SPEED# | Check the parameters of over speed. | |||
| 34 | Set sensitivity of SENSOR | LEVEL, # | A=1-5: sensitivity range; default:2 LEVEL# check the current sensitivity of sensor | |
| 35 | Set the LED sleep mode | LEDSLEEP,[A]# | A=ON/OFF, LED sleep mode control, ON: start LED sleep mode, OFF: LED normal display, default：ON； | |
| #LEDSLEEP | Check the parameters of LED sleep mode. | |||
| 37 | Set the instruction password | PWDSW,[A]# | A= ON, enable the instruction password. | |
| PWDSW,[password],[B]# | Numbers and letters mix inputs supported for instruction password, at least 1 character, no more than 19 characters, default: 000000; B=OFF, disable the instruction password. | |||
| 38 | Revise the instruction password | PASSWORD,[A],[B]# | A=old password, numbers and letters mix inputs supported, at least 1 character, no more than 19 characters, default: 000000; B=new password, numbers and letters mix inputs supported, at least 1 character, no more than 19 characters. | |
| RECOVER,[A]# | A=instruction password, numbers and letters mix inputs supported, at least 1 character, no more than 19 characters, default: 111111. | |||
| 40 | Set the SMS forwarding | FW,[A],[B]# | A=phone number, phone number to send; B=SMS content, content forward. Only SOS can use this command. |
How To Send Codes To The GT06N Device
Codes are sent by sending a text message to the SIM inside the device, see examples
The GT06N Vehicle Tracking Device One of the best devices in terms of ease of installation, handling, location accuracy, and speed of GPS signal acquisition. I used it for a very long time, and its only drawback was the battery swelling due to excessive heat. The solution to the problem at the time was to completely remove the device battery.
Link to download the text command file in PDF format: All commands of the GT06N device
To Activate And Program Tracking Devices And Obtain The Best tracking Software, Contact Us
WhatsApp: 966570960313+
Please how do i reset the imei
Contact me on WhatsApp +966570960313 or Telegram @Trkify
How can I find out the username and password via messages?
By sending code 102
Where is the code, my dear brother?
Welcome, what code specifically?
Is there a video explaining how to activate the SIM card and GT06N device on the server? Please reply.
The activation method is simple and is mentioned in the codes via the GT06N server identification code, and you can view the server details. from here Contact us and we will give you our server address, username and password to access the application and track the vehicle.
What is the code to open the path?
I want to know the SIM card number inside the device
You must remove the SIM card and insert it into the mobile phone.