GF-07 Car Tracker

_{Table of contents (Click to go to section):}

The GF-07 is a sound recording and tracking device.Car Tracking Devices Month The most widely used one, as it includes tracking, locating, recording and monitoring sounds. The following is how to activate and use the device and a list of codes. وtext commands To take advantage of the features of the GF07 device:

Disclaimer: We have no relationship with the manufacturers or sellers of the device, and our role is limited to spreading knowledge in ways Activate various tracking devices

Activating and operating the GF-07 device:

Insert the SIM and memory card into the device, the device will start automatically and the red light will flash 4 times or for 30 seconds and then turn off. This means that the device is ready for use. If the red light doesn't go off, it means you either have a low battery or the SIM is incompatible or not installed correctly. Activate the device for the first time by texting the FACTORY# command to the SIM number inside the device from your mobile phone.

Get the original and guaranteed tracker from SinoTrack | Small size | Live tracking of movements | 1054 battery | Tracking App Free! Product Rating 4.7/5 Order now!

List of codes and text commands for GF-07:

List of codes and text commands for the GF-07. To send codes, send a text message to the SIM number inside the device:

000: Link a main number to the device and the device will respond to calls coming from this number only. When the code is sent, the device responds by confirming receipt of the code and the main number, as in the picture below

555: Audio recording (the device starts recording the surrounding sound and storing it in the memory card)

777: Obtain the current location of the device via a text message containing a Google Maps link. If the device does not pick up the satellite signal, you will receive a message in Chinese, which means that the device is unable to pick up the GPS signal and determine the location. Try placing the device next to a window or outdoors and make sure there is no barrier between the device and the sky.

666: Monitor the sound so that the device calls the main number that was linked at the beginning of activation if the strength of the sounds surrounding the device exceeds 40 decibels

445: Delete memory content

888: Check device status, battery charge level, signal strength, memory card capacity, etc

GF-07 response to code 888 — GF07 response to code 888

999: Restart the GF07 device

444: Reset the device and cancel all previously sent codes (except the 000)

Reply code 444 gf07 device status — GF07 response to code 444

FACTORY# Factory reset and erase all settings (resend code 000 After sending this code)

gf07 response to factory code — The GF07 responded to the Factory code

Hear the sounds surrounding the device

To hear the sounds surrounding the device, call the SIM number inside the device from the main number that was linked when the device was activated, and the device will open the line for you to hear the sounds.

You may also like:

Frequent problems and how to solve them:

1- Not getting any response from GF07 device:

If you do not receive a response from the device when sending codes via text messages, make sure of the following:

Make sure that the SIM card has enough credit to be able to respond to the codes you send
Make sure that the SIM does not have a PIN code

Most of the problems with the GF07 not responding are due to the sim card. In order to avoid this problem, try the sim card first before putting it inside the device, insert it into a regular mobile device, then send text messages to and from it to make sure it is working normally and sending and receiving messages.

2- GF-07 device is not connected to the application:

The GF-07 device does not connect to the application — GF-07 8 Car Tracker

The device's inability to connect to the application may be due to a problem with the APN access point or due to insufficient internet balance in the SIM card: or the device does not support the SIM card's service provider

First, make sure that there is sufficient internet credit within the SIM card
Send code FACTORY# It is the factory reset code for the device, and after waiting a few minutes, set the APN on the device, by sending a command APN,jawalnet.com.sa# change jawalnet.com.sa To the access point of your service provider, as each telecommunications company has its own access point. (After sending the FACTORY code, make sure to re-link your number by sending the code 000)

3- GF07 device is not charging:

You must insert a SIM card into the device for the GF07 to start charging. Make sure you insert the SIM card correctly and the device will charge normally.

The most prominent disadvantages of the tracking device GF-07:

Weak GPS satellite antenna signal, as the device finds it difficult to determine the location due to blocking the signal when placed inside the car or inside the house
Do not respond to location codes in text messages or respond in languages you do not understand.
Not responding to device activation and linking codes
Codes not responding sometimes
Not supporting some types of SIM cards
Blurred audio and recording
Change settings suddenly, requiring a reset of the device
Battery running out quickly

mbfallata

SMS commands for tracking devices Wireless Tracking Device Small tracking device Tracking and locating tips and tricks

GF-07 Car Tracker

_{Table of contents (Click to go to section):}

Activating and operating the GF-07 device: