SMS commands

Explanation of how to activate and operate the ST-901 GPS Tracker, one of the best vehicle tracking devices from SinoTrack, which is characterized by ease of installation and high durability To obtain a distinctive tracking program for the ST-901 device from Trackify at a competitive price, contact us: +966570960131 Installing the ST-901 GPS Tarcker device Insert the chip in the designated place according to the mentioned direction ST901 GPS device lights Blue light = GPS light Unstable flashing = Unable to receive the GPS signal Steady light = Excellent GPS signal Activating the ST-901 GPS Tracker The ST-901 GPS device is activated via text commands and codes by sending a text message to the chip number inside the device after turning it on ST-901 GPS Tracker commands and codes - Modify the default password To modify the default password, send: 77712340000 If the code is successfully executed, the device will respond with the phrase: SET OK - Set the admin number The admin number is authorized to send messages and deal with the ST-901 GPS Tracker device (You can specify 3 admin numbers) To set the number, send: 05111111110000 1 If the code is successfully executed, the device will respond with the phrase: SET OK - Choose how the device works. The ST-901 GPS Tracker works in two ways: 1- Offline via text messages, so that you send a location command when needed and the device responds with location details with a Google Maps link. To activate tracking via text messages, send: 7000000 If the code is successfully executed, the device will respond with the phrase: SET OK 2- Direct tracking of movements via the application, which requires activating the Internet package on the chip and downloading the device’s application from here: SinoTrack – GPS Tracking System To activate direct tracking for the ST-901 GPS device, send: 7100000 If the code is successfully executed, the device will respond with the phrase: SET OK – Determine the location via text message 6690000 The device will respond with: Related articles: – Programming the device to send a daily report You can program the ST-901 GPS Tracker to send a text message with location details to the admin number at a specific time every day To activate the feature, the country’s time zone must be set so that the message timing is correct (for example, Saudi Arabia’s time is +03 GMT) The default time for the device is 00 GMT – Setting the ST-901 device’s time zone 896000 E03 If the code is successfully executed, the device will respond: SET OK time zone is 8960000 03 – Setting a report Daily Location This command is set once and the device will send a message with the location details at the same time every day. In this example, the device sends the message every day at 1:66500001330 pm. To set, send: 6650000 - Cancel the daily report message 122000OFF - Determine the location by calling. If you call the SIM card number inside the device, it will close the line and send a text message with the location details and a Google Maps link to the calling number. - Set speed alert 120 5 - Low battery alert You can set the device to send a text message or call the admin number when the battery level drops from 1 (highest level) to 1 (lowest level) To call when the level drops to 1500000, send: 1510000 To send a text message when the battery charge is low, send 901 - Remotely restart the device to restart, send: RESTART Activate the ST-901 GPS Tracker program The ST-XNUMX GPS Tracker comes with the SINOTrack application for direct tracking via mobile. To activate the tracking program, the SIM card must be equipped with a package Internet.

How to activate the GT06 GPS device to track vehicles step by step with pictures and a list of codes and text commands to activate and program various devices and obtain the tracking program Contact us on WhatsApp: +966570960313 The first step: Insert the chip and turn on the GT06 GPS device Lights status and meaning Note: All lights go out after 5 minutes. If you insert the device's chip or the device receives any command via SMS, it will turn on the lights for 5 minutes. How to connect the GT06 wires to the vehicle Read also: The location of the GT06 GPS device installation inside the car is shown in the picture Some suggested places to install the tracking device inside the car, make sure the antenna is facing the sky to get the satellite signal and accurately determine the location Commands and text codes for the GT06 GPS device Below are the text codes to program the GT06 device, taking into account that the default password for the device is 123456 and the password must be added when sending any code to the device

The TK303 GPS Tracker from the Chinese company Coban is one of the most popular tracking devices around the world. In this article, you will learn how to activate the device step by step. To activate and program various devices and obtain the tracking program, contact us on WhatsApp: +966570960313 Turn on the TK303 GPS for the first time Configure the device for use and password To configure the device and activate the default password, send a text message containing the code begin123456 to the chip number inside the device. The device will respond with the phrase Begin OK and then configure all settings to the default settings (the default password is 123456 and must be used when sending any code to the device) Set the admin number for the TK303 GPS device To set the number, send admin123456 00123456789 Make sure the number is complete, including the international code, with the addition of 00 at the beginning (the admin number is the number that the device will respond to when sending a command to determine the location, listen to sounds, or stop the vehicle) Determine the location of the vehicle Stop the vehicle remotely Read also: Direct tracking via the application To track the device via the application, you must configure the server settings and the access point (to get a special application, contact us) Important commands and codes for the TK303 GPS device

Features of the PG12 GPS Tracker: Small size, Live tracking, Voice recording, Track storage, Magnet for installation, Geo-fence setting, Battery capacity 500 mAh, Location accuracy 2 to 10 meters, Temperature tolerance -20 to 70 degrees Celsius, Network type: 2G, You may also like: – How to activate the GT06N GPS Tracker – How to activate the GF-07 tracking and audio monitoring device – How to activate the tracker    

To activate and program various devices and obtain the tracking program, contact us on WhatsApp: +966570960313 Commands and codes for checking and inquiring GT06N Query SMS Commands No. Function Command/Code Response Explanation 1 Check GT06N firmware version VERSION# eg[VERSION]GT06B_10_8MM_B25_V11_LA [BUILD]2013/01/04 17:45 2 Check GT06N parameters PARAM# egGPS report on time interval：IMEI:868120103643505;TIMER:20,20; SENDS:5; SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1; Defense time:10;TimeZone:E,8,0; GPS report on distance interval：IMEI:868120103643505;Distance:200; SENDS:5; SOS:13730454825,,;Center Number:;Sensorset:10,1,5,1; Defense time:10;TimeZone:E,8,0; 3 Query GT06N network setting GPRSSET# egGPRS:ON; APN:CMNET,,;Server:1,hgt06.szdatasource.com,8841,0;URL:https://maps.google.com/maps?q=; 4 Check GT06N status STATUS# egBattery:3.41V,Battery too low! Warning; GPRS:Link Up; GSM SignalLevel:Strong; GPS:Successful positioning, SVS Used in fix:10(11),GPS Signal Level:32,31,32,31,28,29,29,36,32,33; ACC:OFF;Defense:OFF 5 Check position status WHERE# egCurrent position!Lat:N22.577156,Lon:E113.916748,Course:0.00,Speed:0.00Km/h,DateTime:2013-01-08 17:35: 32 6 Check URL URL# eg<01-0817:36>https://maps.google.com/maps?q=N22.577156,E113.916748 7 Check position POSITION#OR123 egGPS located: <01-0817:36>https://maps.google.com/maps?q=N22.577156,E113.916748GPS not located: GPS not fixed, please wait for a while, and then try again.   8 Check geo fence status FENCE#egFenceType:Circle, ON, Latitude:N22.577091,Longitude:E113.916748, radius:600m, in out:IN or OUT, alarm type:1FenceType:Circle, OFF, Latitude:0.000000, Longitude :0.000000,radius:0m, in out:IN or OUT, alarm type:1 9 Check moving status MOVING# egMoving Switch:OFF; Radius:300m; Alarm type:1 Moving Switch:ON; Lat:N22.577080; Color:E113.916794; Radius:300m;Alarm type:1 GT06N Query SMS Commands Related links: GT06N Settings SMS Commands No. Function Command/Code Response Explanation GT06N SETTING CLASS 1 Set APN APN, [apnname]#ORAPN, [apnname],[user],[pwd]# Close automatic APN and set by yourself. APN# Check the current APN parameters. 2 Set automatic APN ASETAPN, [X]# X=ON/OFF;ON: open automatic APN;OFF: close automatic APN. ASETAPN# Check automatic APN status 3 Set server parameters SERVER,mode,domainName/IP,port,protocol# eg: SERVER,1,www.ydpat.com,8011,0#SERVER,0,211.154.135.113,8011,0#mode = 1 means set with domain namemode = 0 means set with ip address protocol = 0 means connect server with TCP protocolprotocol = 1 means connect server with UDP protocol SERVER# Check the current sever parameters 4 Set GMT parameter For GT06N GMT,[A],[b],[C]# A：E or W；”E” means eastern time zone , “W” means western time zone；default：EB：0～12；time zone default：8C：0/15/30/45；half time zone；default：0 GMT# Check the current time zone parameters 5 Restore GT06N to factory FACTORY# Restore to factory setting 6 Edit URL EURL,network links# set the network links for latitude and longitude, default: https://maps.google.com/maps?q= EURL# Check the current URL 7 GPRS switch GPRSON,X# current GPRS status 0 Reboot GT1N RESET# The device would reboot in 1S after receiving the command. 9 GPRS blocking alarm GPRSALM,X# phone number. SOS,D,[sequence number 1][, sequence number 2][, ​​sequence number 3]# Delete the phone number according to the sequence number. SOS,[D],[phone number]# Delete the matching SOS phone number. SOS# Check the SOS phone number. 11 Center phone number setting CENTER, A, [phone number]# Add center phone number. CENTER, D# Delete center phone number. CENTER# Check the center phone number. 12 Heartbeat interval setting HBT,[T1],[T2]# T1 ranges 1~19(minutes), heartbeat package upload interval when ACC ON; default is 3;T2 ranges 1~19 (minutes), heartbeat packet upload interval when ACC OFF; default is 5; HBT# Check the current parameters of T1 and T2. 13 Set GPS data sending interval TIMER,[T1],[T2]# T1 ranges 5~18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 10;T2 ranges 5~18000 (seconds) , upload interval when ACC OFF, default is 10; TIMER# Check the current parameters of T1 and T2. 14 Set distance interval of GPS data sending DISTANCE,[D]# D ranges 50~10000 or 0(meters), distance interval, default is 300; DISTANCE# Check the current distance interval. 15 Set the angle upload ANGLEREP,[X][,A][,B]# detecting time, default: 5 seconds, ANGLEREP,OFF# Close the angle upload. ANGLEREP# Check the angle upload status and its parameters. 16 Set the upload for ACC status change ACCREP,[A]# A=ON/OFF, upload for ACC status change, default: ON ACCREP# Check the upload for ACC status change. 17 Set the GPS data sending batch BATCH,[A][,N]# A= A=ON/OFF, data sending batch function on or off, default:OFFN=1～50, N means the number of messages in the batch , default：10； BATCH# Check the number of messages in a batch. 18 Set the delay of the defense DEFENSE,[A]# A= 1～60 (minutes), delay of the defense, default：10 (minutes). DEFENSE# Check the parameters of the defense. 19 Set vibration sensor detecting time SENSOR, ,[,B][,C]# A=10-300 seconds,detecting time. Default: 10 secondsB-10-300 seconds, alert delay. Deault:180 seconds C=1-3000 minutes, vibration alert interval. Default: 30 minutesSENSOR# Check the parameter of the status 20 Set the GPS controlled time by sensor SENDS,[A]# A=0-300(minute), time duration for GPS to work once vibration detected, 0 means GPS always on work , default: 5(minute) SENDS# Check the parameters of the time. 21 Disarm DSRESET# DSRESET# Cancel the current Arm status 22 Clear the backup data CLEAR# 23 Set the static data filtering SF,[A][,B]# A=ON/OFF；static drift filtering switch；default: ONB=10 -1000(m)；maximal filtering distance；default: 100(m)；SF# Check the parameters. 24 Set the petrol/electricity control RELAY,[A]# A=0/1；0 means connection, 1 means cut off；default: 0. RELAY# Check the status of the control.