How to activate ST-901 GPS Tracker
Explanation of how to activate and operate the ST-901 GPS Tracker, one of the best vehicle tracking devices from SinoTrack, which is characterized by ease of installation and high durability To obtain a distinctive tracking program for the ST-901 device from Trackify at a competitive price, contact us: +966570960131 Installing the ST-901 GPS Tarcker device Insert the chip in the designated place according to the mentioned direction ST901 GPS device lights Blue light = GPS light Unstable flashing = Unable to receive the GPS signal Steady light = Excellent GPS signal Activating the ST-901 GPS Tracker The ST-901 GPS device is activated via text commands and codes by sending a text message to the chip number inside the device after turning it on ST-901 GPS Tracker commands and codes - Modify the default password To modify the default password, send: 77712340000 If the code is successfully executed, the device will respond with the phrase: SET OK - Set the admin number The admin number is authorized to send messages and deal with the ST-901 GPS Tracker device (You can specify 3 admin numbers) To set the number, send: 05111111110000 1 If the code is successfully executed, the device will respond with the phrase: SET OK - Choose how the device works. The ST-901 GPS Tracker works in two ways: 1- Offline via text messages, so that you send a location command when needed and the device responds with location details with a Google Maps link. To activate tracking via text messages, send: 7000000 If the code is successfully executed, the device will respond with the phrase: SET OK 2- Direct tracking of movements via the application, which requires activating the Internet package on the chip and downloading the device’s application from here: SinoTrack – GPS Tracking System To activate direct tracking for the ST-901 GPS device, send: 7100000 If the code is successfully executed, the device will respond with the phrase: SET OK – Determine the location via text message 6690000 The device will respond with: Related articles: – Programming the device to send a daily report You can program the ST-901 GPS Tracker to send a text message with location details to the admin number at a specific time every day To activate the feature, the country’s time zone must be set so that the message timing is correct (for example, Saudi Arabia’s time is +03 GMT) The default time for the device is 00 GMT – Setting the ST-901 device’s time zone 896000 E03 If the code is successfully executed, the device will respond: SET OK time zone is 8960000 03 – Setting a report Daily Location This command is set once and the device will send a message with the location details at the same time every day. In this example, the device sends the message every day at 1:66500001330 pm. To set, send: 6650000 - Cancel the daily report message 122000OFF - Determine the location by calling. If you call the SIM card number inside the device, it will close the line and send a text message with the location details and a Google Maps link to the calling number. - Set speed alert 120 5 - Low battery alert You can set the device to send a text message or call the admin number when the battery level drops from 1 (highest level) to 1 (lowest level) To call when the level drops to 1500000, send: 1510000 To send a text message when the battery charge is low, send 901 - Remotely restart the device to restart, send: RESTART Activate the ST-901 GPS Tracker program The ST-XNUMX GPS Tracker comes with the SINOTrack application for direct tracking via mobile. To activate the tracking program, the SIM card must be equipped with a package Internet.
